Shenzhen Lanhai Group Co., Ltd.

Shenzhen Lanhai Group Co., Ltd.

Favorite  |  Set Home
Products Category
Contact Us

Name: Jonny
Mobile: +86-15692442672
Add: ShaJing Town, Bao-An District, ShenZhen, GuangDong Province, PRC 518104
Skype: jonny-guo
E-mail: info@sled-electronices.com
skype: jonny-guo

WiFi LED Controller

WiFi LED Controller
Product name : WiFi LED Controller
Item : WiFi Controller
Details :

  Product Summarize

1. Product constitute

1. LED-WiFi Controller
 It is the core of product, responsible for receive control signal and control LED equipment.
 
2. RF remote control
 In the condition of not use the mobile phone as remote control, you can choose RF remote control to control LED.
 
3.CD
 Include IOS operating system and Android operating system mobile soft.
 
2. Product summarize

    LED-WiFi controller is following the traditional with infrared, RF technology controller foundation, it is birth of market and customer's
demand, it is one type controller which integration the newest wifi technical in the market. It makes the LED control more convenience,
more hommization. We can use an Android system or IOS system mobile phone to install control software, then it can control LED, this
is the wishes of every customer.

Use WiFi technology can make our control range more wider, can get rid of narrow space constraint, in building can control more than
50m, in outdoor can control more than 100m.In the condition of not use the mobile software, also can use the remote control to control,
very convenience, bring many choices for you.

II. Technical Parameters

1. Remote control technical parameters

1:Working temperature:-20-60℃

2:Power supply method:AAA*3

3:Supply voltage:1.5V*3

4:Standby power:0.015mW

5:Standby current:3uA

6:Working current:200uA

7:Emission current:10mA

8:Remote control distance:about 50m

9:Standby time:6 months


2. Software technical parameters

 1:Name:Dream Color

 2:Runtimeplatform:Android version support Android system, IOS version support IOS   
system, equipment must have WiFi function.

 3:Byte: Android version(622K)、IOS version(581K).

 4:Language: English

 5:Category: communications

6:Free, green, noplug-ins

3. Controller technical parameters

1:Working voltage: DC5--24V

2:Output control: can flexible control 3 channel, 2 channel, 1 channel LED lamps.

3:Output current: 4A*3

4:Connect mode: common anode

5:External dimension: L107*W65*H30(mm)

6:Receiving sensitivity: 802.11b DSSS(-5dBm),802.11b CCK (-10dBm),802.11g

   OFDM(-15dBm)

III. Dream Color Instruction

1. Dream Color install course

1) This software have Android version and IOS version, according to your mobile phone to choose to install, below respectively
introduce Android version and IOS version install and use method: Android version install as below:

Open the optical disk can see the Dream Color erection Sequence Click DreamColor.apk to install

Installation complete click ,

Open application   

 

1. On Off key  2. color disk  3. mode key4. speed/brightness bar
5. RGB mode LED control window 
6. Cold white and warm white mode LED control window
7. Dimmer mode LED control brightness window
8、Dream Color software setting window
 
Following is control color temperature and brightness two mode page:
 
CT mode page(cold warm white mixed mode)   DIM mode page(dimmer mode)
1. IOS version install method:(not escape or escape all can suit) can enter "app store" search Dream Color.
Then it can find our software(below scheme just limit after escape) or open itunes, make our installation package
Dragged into itunes, as picture click to install.
Installation complete click ,open application(same with Android version).
2. Connect WiFi network
    If you open Dream Color show like below picture: prompt to choose"OK", jump to WiFi setting interface connect WiFi LED controller.
Or choose "cancel"don't jump,then setting SIMULATION is ON, it will change to do not connect controller node,diagram form as below:
 
choose proceed wifi setting window

Finished setting, if popup below window:
 
indicate connect succeed
 
open wifi connect setting
 
prompt connect correct wifi equipment
3. ON/OFF Key
ON/OFF, before control LED, open on/off key. Click OFF close LED equipment.
4. Mode Key Function
    Mode key under 3 mode page is entirely different, under CD mode page to control LED dynamic work mode, under CT mode page to
control 11 kinds of special color temperature state, under DIM mode page to control 11 kinds of special brightness state.
5. Color disk instruction
Color disk under 3 mode page, the function is entirely different: under CD mode page is used for adjust color, under CT mode page
is used for adjust color temperature, under DIM mode page is used for adjust brightness.
6. CD mode page control function
CD mode page is used for control LED product which consist of red,green,blue, under this mode page, every time after touch the mode
key"M", the lighten way will change."M" is used for setting LED dynamic effect. Color disk touch point change will make the LED color changed.
7. CT mode page control function
This mode page is used for control LED product which consist of warm white and cold white. Brightness bar is used for setting the
LED brightness, color disk adjust LED color temperature, mode key is used for choose some kinds of default special color temperature
value.
8. DIM mode page control function
DIM mode page is used for control LED product which consist of single color, color disk is used for adjust LED brightness, mode
key"M" is switch some special brightness state(for example: 25% brightness, 50% brightness, 75% brightness, 100% brightness)
9. Speed/brightness bar instruction
    Speed/brightness bar under different mode page is different: under CD mode page, different situation separately control brightness
and speed, under CT mode page, it is control brightness.
10. Setup mode function
The last is Setup touch key, it have SIMULATION、SOUND and WiFi CONNECTION 3 options, SIMULATION is mainly used for set
software imitate and actually connect LED-WiFi controller to choose, if choose ON state, do not need to connect LED-WiFi controller, it
can used for software demonstrate, imitate demonstrate ect. Practical application need to set OFF(actually, when you connect WiFi, the
 software have automatic set to OFF), SOUND is the prompt tone of click the software switch,WiFi CONNECTION is used for jump to
wifi network setting interface proceed wifi connection.
IV. LED-WiFi Controller Function Instruction
1. Working state instruction
Indicator light Function table
Power Power indicator light, long-time bright shows power supply normally
Wifi Free time long-time bright, have wifi data enter flicker, configuration wifi Ssid off
Link Receive the date, become flicker
RF Have correct wifi date enter flicker, free time die out, have remote then control flicker

2. Setting SSID number
The dial code is used for setting LED-WiFi controller Ssid number, corresponding table as below. Form 0 to 15, have 16 code in total, so
our Ssid number fasten to LN001 to LN016. That means use our product in same small area can set 16 mutual isolation LAN, once the
dial code changed after switch was dialed, Ssid number immediately be modified, so you need to note that it need to search and connect
again.
code SSID  
0 LN001  
1 LN002  
2 LN003  
3 LN004  
4 LN005  
5 LN006  
6 LN007  
7 LN008  
8 LN009  
9 LN010  
A LN011  
B LN012  
C LN013  
D LN014  
E LN015  
F LN016  

3. Connect LED, Power supply port
LED port under CD mode page need to connect RGB 3 channel LED equipment, under CT mode page need to connect cold white
and warm white 2 channel LED equipment group, under DIM mode page need to connect single color LED equipment.
4. Match Key function
The first time use the controller and remote control, maybe because the controller address and remote control address is not match,
it will cause the remote control can not control, at this time, it need to use this button to make this 2 address matched.
    Use method: first, press the controller "Match" key, at the same time press any key of the remote control, more than 2s, now the remote
control indicator light RF will flicker 3 times, release "Match" key, then finished.
5. Function key function
“Function” key is a composite button, it have switch and mode change function.
Function instruction: long-time(more than 2s): on off;
 Short press(less than 1s): mode change.
6. Remote control function instruction
 
1、on/off key  2、pause key3、mode+   4、mode-
5、Color pulley key    6、brightness+    7、brightness-   
 8、speed+   9、speed-
1﹑Touch remote panel have 64 touch button(point), each button function as below:
 
1、on/off key, any state, can turn on or turn off controller output;
 
2、pause key, under dynamic mode, can make the controller stop current state;
 
3、this key have 2 function:
①mode add key, so when the current control mode is pulley mode(color), if it need to realize the mode(color)
in controller, can press this button.
②mode switch key, so when the current control mode is M key mode, can switch the regulation mode(color)
in M+ key mode table.
4、This key have 2 function:
①mode minus key, so when the current control mode is pulley mode(color), if it need to realize the mode
(color) in controller, can press this button.
②mode switch key, so when the current control mode is M key mode, can switch the regulation mode(color)
in M- key mode table.
 
5、output brightness control key, every time you press this button,the brightness
   series add 1, altogether 100 levels;
 
6、output brightness control key, every time you press this button,the brightness
   series minus 1, altogether 100 levels;
 
7、output speed control key, every time you press this button,the speed series add
   1, altogether 100 levels;
 
8、output speed control key, every time you press this button,the speed series
   minus 1, altogether 100 levels;
 
 
9、Color pulley touch button, static mode choose key, up to 55 touch point.
 This key have 2 function:
①pulley static color choose button, so when the current control mode is M key mode(color), if need to realize
the static color on pulley, can press this button.
②pulley color switch key: can switch from 55 static color(pulley
 shows color).
 
 
2、Power management: Stop using remote control more than 20 s, remote control will automatically into standby mode(the
state can not touch),to extend the battery life for use;shake the remote mildly remote return to work station(the state can touch).
Remark: This remoter just apply to RGB model.
7. Built-in mode form of controller
1,The mode form of RGB Control:
 Mode number    function   remark
1 Static red 
Brightness is adjustable,Speed is unadjustable
2 Static green
3 Static blue
4 Static yellow
5 Static purple
6 Static cyan
7 Static white
8 Three-color jumpy changing Speed is
adjustable, Brightness is unadjustable
 
9 Seven-color jumpy changing
10 Three-color gradualchanging
11  Seven-color gradual changing

 
2. The mode form of color temperature control:
 
 Mode numberfunction   remark
1 100%CW Brightness adjustable
2 80%CW
3 60%CW
4 40%CW
5 20%CW
6 PW(pure white)
7 20%WW
8 40%WW
9 60%WW
10 80%WW
11  100%WW

 
3. The mode form of dimming Control:
 
Mode number function remark
1 1%  
 
Brightness proportion
2 10%
3 20%
4 30%
5 40%
6 50%
7 60%
8 70%
9 80%
10 90%
11  100%

V. Explain installed hardware
1. Install ANT
ANT's installation drawing: clockwise install WIFI antenna and anticlockwise take down the antenna.
2. Install power supply and LED equipment
This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the
left side (3、2、1、V+)is connect led equipment,the fifth interface is connect the anode V+ of power supply, the sixth interface is connect
the cathode V_ of power supply. According to the rated voltage of led lamp, we supply power to controller ,and the rated voltage of controller
is 24V. As follows:
3. Connect threechannels LED instruction
When connect three channels LED, you should put the Dream Color software switch to CD mode to use,only under this mode,you
can control the LED's color,brightness and speed.Color disk adjust the color(Adjust process can be seen in the upper left corner R, G, B
numerical with change),speed/brightness item adjust speed and bright("M"set the LED dynamic effect,"M"adjust the LED dynamic change.
 
4. Connect two channels LED instruction
 
When connect three channels LED, you should put the Dream Color software switch to CD mode to use,only under this mode,you can
control the LED's color temperature,brightness and color temperature shortcut key settings.Color disk adjust the color temperature(
meanwhile top left CW,WW numerical with change),brightness item adjust bright,"M"key set the special color temperature state.
5. Connect onechannel LED instruction
When connect three channels LED, you should put the Dream Color software switch to CD mode to use,under this mode,use color
disk control the LED's brightness,Adjust process can be seen in the upper left corner NM numerical with change.
 
VI. FAQ
 
1. Dream Color can not open(error and breakdown),how to do?
Answer: If it is happened, just need to open again then you can solve. If it is still not open,that maybe the compatibility of software to this
phone is not very good,so you need to install the software to other phone to use.
2. Dream Color can not control LED?
Answer: It maybe happen of wifi connection unsteadily.1,you can try shorten the distance of phone and controller.2, you can enter SETUP
reconnection(reinstall simulation to OFF), if appear this ,if the network of you connect is LN0XX form,that is maybe phone and wifi
connection unsteadily, so retry several times, if it is still not useful, so you need to change the phone.model.3, close the software and
open again. One of above three ways can solve this problem,but if there can not get the data ,you must be ensure the distance is not too
far.
 

←[Previous : 24-key infrared] [Next : DMX Controller]→

Related Products :
IR 44-key RGB Controller with 72W 12V driver
SLSC-24IR-72W
IR 44-key RGB Controller with 72W 12V driver
24 key RGB infrared controller
SLSC-24-IR
24 key RGB infrared controller
LED RGB RF controller
SLSC-RF-01
LED RGB RF controller
LED Remote RF controller
SLSC-RF-02
LED Remote RF controller
LED RGB Touching Remote control
SLSC-Touch-RGB
LED RGB Touching Remote control
LED Color tones temperature RF Controller
SLSC-Touch-CCT
LED Color tones temperature RF Controller
Mini RGB LED Amplifier
SLSC-mini-amp
Mini RGB LED Amplifier
LED DMX Controller dmx512 decoder
DMX Controller
LED DMX Controller dmx512 decoder

online service

skype: jonny-guo