Shenzhen Lanhai Group Co., Ltd.

Shenzhen Lanhai Group Co., Ltd.

Favorite  |  Set Home
Products Category
Contact Us

Name: Jonny
Mobile: +86-15692442672
Add: ShaJing Town, Bao-An District, ShenZhen, GuangDong Province, PRC 518104
Skype: jonny-guo
E-mail: info@sled-electronices.com
skype: jonny-guo

IR 44-key RGB Controller with 72W 12V driver

IR 44-key RGB Controller with 72W 12V driver
Product name : IR 44-key RGB Controller with 72W 12V driver
Item : SLSC-24IR-72W
Details :
Product Description
IR 44 keys integrate controller adopts the advanced micro control unit; it is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on; it has an important advantages that integrated with power supply, more easy connection and more simplicity to use. Meanwhile, you could adjust brightness, static color choices and various dynamic changes in lighting effects through popular infrared 24 keys remote control. There are two configurations for choose: 12V/3A/36W and 12V/6A/72W.
 
Technical Parameters
Working temperature
-20-60
Static power consumption
<1W
Supply voltage
AC85V-265V
0utput voltage
DC12V
Out put
3 channels
Connecting mode
Common anode
Output current
<1A(each channel); <2A(each channel)
Output power
36W;72W
Gray levels
16
Speed levels
32
External dimension
L148*W54*H33(mm)
Packing size
L185*W82*H60(mm)
Net weight
260g
Gross weight
300g
Modes
20 modes in total
Remote control distance
≤10M




Direction for use
     Connect the load wire at first, following by the power wire; Please ensure short circuit can not occur between connecting wire before you turn on the power
     Operation: you will receive infrared remote control in front of infrared receiver to ensure that there is no barrier between the remote controller and receiver.
The key-press functions are shown in the table as below (in accordance with the key position order):
Brightness rise
Brightness fall
Pause/Run
On/Off
Static red
Static green
Static blue
Static white
Static orange
Static light green
Static dark blue
Static milk white
Static dark yellow
Static cyan
Static lyons blue
Static white pink
Static yellow
Static light blue
Static purple
Static green-white
Static light yellow
Static sky blue
Static brown
Static blue white
Increase red
Increase green
Increase blue
Speed up
Decrease red
Decrease green
Decreaseblue
Speed-down
DIY key1
DIY key2
DIY key3
Automaticchange
DIY key4
DIY key5
DIY key6
Flash on and off
3 color jumpy change
7 color jumpy change
3 color fade change
7 color fade change
 
SupplementAbout DIY key, when it’s pressed first time, will enter the DIY color mode, you can adjust the color per the 6 keys at above to increase or decrease the R/G/B color by yourself freely(if other key is pressed this time,will jump out from DIY color mode). And you can save the color which you have adjusted by pressing the DIY key once again. When next time this key is pressed, it will show the color you saved last time.
There are 6 DIY keys, so you can save 6 colors you like. They are all Independent, have no effect each other. For example: if you press DIY key1 first, and then press DIY key2, DIY key1 will be invalid, until DIY key2 is pressed once again, current color will be saved.

Typical Applications



Notes
1. Supply voltage of this product is AC85V-256V, never connect to others power supply.
2. Before using the infrared remote, the insulating film should be removed.
3. Lead wire should be connected correctly according to grade that connecting diagram offers.
4. This product is not to overload;
5. Warranty of this product is one year, but exclude the artificial situation of damaged or overload working.
 
Common Problems 
Problems
Possible cause
Solution
1.      Lamp does not light after power
Power cord is not properly connected, or there is not output switching power supply
Connect the power cord properly or replay the power
Lamp power cord is not connected or short circuit
Connected lighting power cord
2. After connecting some of the load the controller does not work
The connected load is too large,so that it has burned in some of the components of the controller
Replace parts of components or replace the controller
3. After connecting to power the controller is working properly,but remote control can not work
1. The blank on the button cell of remote controller did not pulled out 2. the remote controller do not target the receiver
1.Take away the transparent blank 2.Target the remote controller to the receiver
[Next : Multi Touch RGB]→

Related Products :
WiFi LED Controller
WiFi Controller
WiFi LED Controller
LED RGB Touching Remote control
SLSC-Touch-RGB
LED RGB Touching Remote control
24-key fullcolor infrared controller
24-key infrared
24-key fullcolor infrared controller
LED Color tones temperature RF Controller
SLSC-Touch-CCT
LED Color tones temperature RF Controller
24 key RGB infrared controller
SLSC-24-IR
24 key RGB infrared controller
Multi Touch RGB Controller
Multi Touch RGB
Multi Touch RGB Controller
Mini RGB LED Amplifier
SLSC-mini-amp
Mini RGB LED Amplifier
LED RGB RF controller
SLSC-RF-01
LED RGB RF controller

online service

skype: jonny-guo